Back to News
quantum-computing

Liquid metals pass the test for linking quantum modules at 15 millikelvin

Ivy Delaney
Loading...
7 min read
0 likes
⚡ Quantum Brief
Researchers at Boston University and IBM Quantum have demonstrated a method for creating reconfigurable superconducting using micro-scale liquid metal interconnects, addressing a key limitation in scaling up quantum processors. The work establishes liquid metals as viable chip-scale interconnects, maintaining high microwave performance even at 15 millikelvin, a temperature colder than outer space. The team realized high-quality signal and ground connections between modules, enabling non-destructive module replacement and consistent device characteristics across multiple thermal cycles.
AI Audio Summary
0:00 / 0:00
Click to play
page-035-object-045.webp
Quantum News · Media Library

Researchers at Boston University and IBM Quantum have demonstrated a method for creating reconfigurable superconducting using micro-scale liquid metal interconnects, addressing a key limitation in scaling up quantum processors. The work establishes liquid metals as viable chip-scale interconnects, maintaining high microwave performance even at 15 millikelvin, a temperature colder than outer space.

The team realized high-quality signal and ground connections between modules, enabling non-destructive module replacement and consistent device characteristics across multiple thermal cycles. Gallium-Based Liquid Metals Enable Chip-Scale Quantum Modularity This performance is critical because superconducting quantum processors require extremely stable and low-noise connections at cryogenic temperatures to preserve the delicate quantum states used for computation. The demonstrated stability across these temperature swings suggests liquid metals can reliably bridge modules in a functioning quantum processor. The work reveals a significant kinetic inductance fraction, identified through a width-dependent resonance frequency shift, and attributes this to the presence of β-phase tantalum as confirmed by X-ray characterization. The research also investigated power-dependent loss mechanisms, observing high-power dissipative nonlinearities qualitatively consistent with a readout-power heating model. Understanding these loss mechanisms is vital for optimizing the power budget of the quantum system and preventing performance degradation at higher operating speeds. The observed behavior aligns with theoretical predictions of how power dissipation affects these types of interconnects. These results establish liquid metals as viable chip-scale interconnects for reconfigurable, modular superconducting quantum systems.

Modular Superconducting Circuits Bypass Fabrication Yield Limits The observed shift provides insight into the material properties of the gallium-based liquid metal and its interaction with the tantalum layer, informing future optimization of interconnect designs. This stability is vital for practical quantum systems, which must operate reliably through repeated cooling and warming during testing and operation. Maintaining consistent characteristics during these cycles validates the liquid metal interconnects as a robust solution for modular designs. “Such data would benefit both the fundamental study of condensed matter systems involving liquid metal and the continued optimization of liquid metal interconnect designs for quantum applications,” the authors wrote.

Liquid Metal Interconnects Maintain Performance Across Thermal Cycles This consistency across temperature fluctuations is critical for practical quantum processors requiring repeated cooling and warming during operation and module maintenance. The ability to non-destructively replace modules using these liquid metal interconnects further validates their robustness. Superconducting connections could be reformed before and after module replacement at room temperature. The design uses liquid metal to connect qubit bus resonators to qubits and an interposer, enabling this plug-and-play functionality. While future experiments are needed to fully parameterize sources of loss, initial tests showed no significant performance degradation when bridging two modules with liquid metal interconnects. This testing demonstrated the potential for liquid metal to be a reusable connectivity solution for modular quantum systems, a critical step toward scaling up quantum processors. The work establishes a foundation for future research focused on optimizing the power budget and preventing loss mechanisms within these systems.

Liquid Metals Demonstrate Reusable Module Connections This sustained functionality is critical for superconducting circuits, which demand extremely low temperatures to maintain quantum coherence, and represents a step toward practical, scalable quantum computing architectures. Beyond initial performance, the interconnects proved reusable, successfully reforming superconducting connections after module replacement, a key requirement for modular designs. The ability to swap faulty components without system-wide disruption addresses a fundamental limitation in scaling quantum processors, as finite fabrication yields often necessitate replacements. A discrepancy between resistance curves may stem from the etching process used to prepare the metal surfaces, potentially altering the composition ratio of gallium, indium and tin.

Liquid Metal Interconnects Match CPWR Microwave Performance The interconnects exhibited negligible degradation even after repeated thermal cycling, a critical requirement for reliable operation of sensitive quantum circuits. The design of the chip assembly prioritizes space efficiency, using a method that requires no additional fixture structure in the lateral dimensions, a key consideration given the constraints of printed circuit board layouts. This approach allows for plug-and-play modularity, enabling non-destructive module replacement at room temperature, a significant advantage over traditional methods that often require extensive and potentially damaging procedures. Researchers achieved micron-level precision in aligning the liquid metal, a feat facilitated by the material’s self-aligning properties and the matching shapes of the connecting components. While assessing the practicality of the system, tests focused on the quality factor as the primary metric for high performance, and overall, no significant performance degradation was observed when bridging modules with the liquid metal interconnects. Future experiments will focus on parameterizing the sources of loss, but initial findings suggest the interconnects perform comparably to conventional coplanar waveguide resonators. The ability to reform superconducting connections following module replacement further highlights the reusability of the liquid metal, an important factor for reducing the cost and complexity of maintaining large-scale quantum systems. The reusability was specifically tested across three thermal cycles between room temperature and 15 mK, demonstrating consistent device characteristics throughout the process. “Thus, a consistent performance of the untouched LM interconnects over multiple thermal cycles, as well as a comparable performance of the replaced LM interconnects before and after module replacement, is preferred for the proposed modular architecture,” the researchers write. The research team also notes that the observed performance opens possibilities for identifying the dissipative contribution of kinetic inductance nonlinearity, a phenomenon that can affect the accuracy of quantum computations. “This could also help identify the dissipative contribution of the kinetic inductance nonlinearity,” they explain. The combination of maintained performance and potential for deeper material understanding positions liquid metal interconnects as a compelling approach for building modular quantum hardware. The results not only demonstrate feasibility but also establish performance on par with conventional interconnect solutions. Chip-Scale Interconnects Support Plug-and-Play Quantum Systems This extreme cryogenic stability is essential for maintaining quantum coherence, the delicate state underpinning quantum computation, and opens new avenues for building larger, more adaptable quantum processors. Beyond maintaining signal integrity, the research highlights the reusability of these liquid metal connections, a critical factor for modular systems. Modules were successfully replaced after initial bonding, with the liquid metal reforming superconducting connections for subsequent operation. This non-destructive module replacement circumvents limitations imposed by fabrication yield, as faulty components can be swapped without scrapping an entire assembly. The ability to rebond modules to residual liquid metal on contact pads after warm-up from cryogenic temperatures suggests a pathway toward streamlined repair and upgrades of quantum hardware. This finding not only explains a resonance frequency shift observed with varying interconnect width but also provides insights into the material properties of the liquid metal interface. The consistency of performance across three thermal cycles, from room temperature down to 15 mK and back, emphasises the robustness of this approach. This thermal cycling tested the long-term reliability of the connections, demonstrating their ability to withstand the significant temperature fluctuations inherent in cryogenic quantum experiments. 👉 More information🗞 Reconfigurable superconducting quantum circuits enabled by micro-scale liquid-metal interconnects✍️ Zhancheng Yao, Nicholas E. Fuhr, Nicholas Russo, David W. Abraham, Kevin E. Smith and David J. Bishop🧠 DOI: http://link.aps.org/doi/10.1103/yc7d-rybf More like thisQuantum PhysicsHow much classical data to send a qubit? Lund University has a measureQuantum PhysicsScientists link photon antibunching to quantum entanglementQuantum Error CorrectionResearchers stitch quantum codes together without extra qubitsQuantum PhysicsA new circuit reverses the standard quantum Zeno probabilityStay currentSee today’s quantum computing news on Quantum Zeitgeist for the latest breakthroughs in qubits, hardware, algorithms, and industry deals. Tags:

Read Original

Tags

superconducting-qubits
quantum-investment
quantum-hardware
ibm

Source Information

Source: Quantum Zeitgeist

Discussion

0 professional contributions

Sign in to join this professional discussion.

Be the first to add a constructive contribution.