Back to News
quantum-computing

Using microwave pulses to plug leaks in quantum computers makes them more reliable - Phys.org

Google News – Quantum Computing
Loading...
4 min read
0 likes
⚡ Quantum Brief
Researchers at the University of Science and Technology of China developed a microwave pulse technique to correct quantum computer leakage errors, achieving 70x better suppression than traditional methods. Leakage occurs when qubits jump to higher energy levels, disrupting calculations and neighboring qubits—a major obstacle in scaling quantum systems. The team tested the method on a 97-qubit Zuchongzhi 3.2 processor, using microwave pulses to reset both data and ancilla qubits without interrupting computations. Unlike hardware-heavy solutions, this all-microwave approach scales efficiently, reducing error rates as qubit counts increase—a rare breakthrough in quantum reliability. Published in Physical Review Letters, the study demonstrates scalable error correction, bringing practical quantum computing closer by mitigating a longstanding hardware limitation.
AI Audio Summary
0:00 / 0:00
Click to play
559501b0-87d1-48a4-96bd-eed638de8323.jpeg
Quantum News · Media Library

December 29, 2025 report The GIST Using microwave pulses to plug leaks in quantum computers makes them more reliable by Paul Arnold, Phys.org edited by Sadie Harley, reviewed by Andrew Zinin Editors' notes This article has been reviewed according to Science X's editorial process and policies. Editors have highlighted the following attributes while ensuring the content's credibility: fact-checked peer-reviewed publication trusted source proofread Credit: Pixabay/CC0 Public Domain Scientists have developed a new approach to correcting common quantum computing errors, which could pave the way for more reliable systems. Quantum computers are powerful, primarily experimental machines that use the principles of quantum mechanics to solve complex problems much faster than today's fastest supercomputers. But they are not perfect yet. The leakage problem The fundamental units of information in these systems (qubits) are incredibly delicate. Unlike the bits of conventional computers, which have only two values (0 or 1), quantum bits can exist in a combination of states simultaneously, but this property makes them prone to errors such as leakage. This is where a qubit suddenly jumps to a higher energy level, moving out of its operational state, which stops it from being part of the calculation. It also interferes with the other qubits around it. In a new study published in Physical Review Letters, scientists have revealed a way to plug these leaks before they accumulate and crash the system. One of the most common ways to deal with errors in quantum computers is with a process called Quantum Error Correction (QEC). However, some QEC operations and the hardware itself can also introduce leakage. Another approach is to shift a qubit's frequency, but this requires additional hardware that is difficult and complex to scale up. Jian-Wei Pan at the University of Science and Technology of China and his colleagues have developed a new way to fix these errors by nudging the leaking qubits back to their correct energy levels with microwave pulses.

The team tested their method on a custom-built Zuchongzhi 3.2 processor with an array of 97 qubits, including data qubits (which hold the quantum information for the calculation) and ancilla qubits (helpers for detecting and correcting errors). Mopping up the leaks The researchers intentionally induced leakage by pushing qubits into higher energy levels. Then they fired microwave pulses to remove the error from the data qubits, allowing them to return to their computational state without the calculation being disturbed. At the same time, they reset the ancilla qubits with another microwave pulse to fully clear the error. Overall, this method mopped up leakage errors over 70 times more effectively than running the system without leakage suppression. This approach was tested on small and large sections of the array. The results showed that the larger the system, the more reliable the quantum computer became. In other words, if you add more qubits, the error rate goes down. This is considered one of the holy grails of quantum computing. Before this experiment, adding more qubits usually made the problem worse. "Our results demonstrate the viability of all-microwave control architectures for suppressing critical errors at scale, paving the way for more advanced quantum error correction implementations," write the researchers in their paper. Written for you by our author Paul Arnold, edited by Sadie Harley, and fact-checked and reviewed by Andrew Zinin—this article is the result of careful human work. We rely on readers like you to keep independent science journalism alive. If this reporting matters to you, please consider a donation (especially monthly). You'll get an ad-free account as a thank-you. More information: Tan He et al, Experimental Quantum Error Correction below the Surface Code Threshold via All-Microwave Leakage Suppression, Physical Review Letters (2025). DOI: 10.1103/rqkg-dw31 Journal information: Physical Review Letters © 2025 Science X Network Citation: Using microwave pulses to plug leaks in quantum computers makes them more reliable (2025, December 29) retrieved 7 January 2026 from https://phys.org/news/2025-12-microwave-pulses-leaks-quantum-reliable.html This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.

Read Original

Tags

energy-climate
quantum-computing
quantum-error-correction
quantum-hardware

Source Information

Source: Google News – Quantum Computing

Discussion

0 professional contributions

Sign in to join this professional discussion.

Be the first to add a constructive contribution.